Cyclic thermal exposure tests of infrared heating to 800 ℃ in 120 s followed by compressed air cooling to 150 ℃ in 60 s were performed for the laser deposited Ti60A （Ti5.54Al3.38Sn3.34Zr0.37Mo0.46Si） alloy. The effects of thermal exposure cycles on length ofβphase, area fraction ofαphase and microhardness of alloy were examined by OM, SEM and EDS. The results indicate that thermal exposure cycles have significant effects on length ofβphase, area fraction ofαphase and microhardness of the alloy. The original fine basket-weaveβand 78.5%αtransform to transient wedge-likeβ, finally leaving granularβand 97.6%coarsenedαwith the increased thermal exposure cycles. The formation mechanism of coarsenedαand broken-upβmicrostructure is discussed. The alloy after 750 thermal exposure cycles has the maximum microhardness, 33.3%higher than that of the as-deposited alloy.
