Immiscible kerosene-water two-phase flows in microchannels connected by a T-junction were numerically studied by a Lattice Boltzmann (LB) method based on field mediators.The two-phase flow lattice Boltzmann model was first validated and improved by several test cases of a still droplet.The five distinct flow regimes of the kerosene-water system,previously identified in the experiments from Zhao et al.,were reproduced.The quantitative and qualitative agreement between the simulations and the experimental data show the effectiveness of the numerical method.The roles of the interfacial tension and contact angle on the flow patterns and shapes of droplets were discussed and highlighted according to the numerical results based on the improved two-phase LB model.This work demonstrated that the developed LBM simulator is a viable tool to study immiscible two-phase flows in microchannels,and such a tool could provide tangible guidance for the design of various microfluidic devices that involve immiscible multi-phase flows.
Confined impinging jet reactor(CIJR)offers advantages for chemical rapid processes and has become an important new reactor used in the chemical industry.The micromixing efficiency in a T-shaped CIJR for two tubes of inner diameter of 3 mm was studied by using a parallel competing iodide–iodate reaction as the working system.In this work,the effects of different operating conditions,such as impinging velocity and acid concentration,on segregation index were investigated.In addition,the effects of the inner nozzles diameter and the distance L between the jet axis and the top wall of the mixing chamber on the micromixing efficiency were also considered.It is concluded that the best range of L in this CIJR is 6.5–12.5 mm.Based on the incorporation model,the estimated minimum micromixing time tmof CIJR approximately equals to 2×10-4s.These experimental results indicate clearly that CIJR possesses a much better micromixing performance compared with the conventional stirred tank(micromixing time of 2×10-3to 2×10-2s).Hence,it can be envisioned that CIJR has more promising applications in various industrial processes.
Particles(including solid particles,liquid drops and gas bubbles)are ubiquitous in a large number of natural processes as well as in industrial productions.Their behaviors are of fundamental importance in multiphase systems since the existence of such dispersed particles influences the momentum,mass and heat transport behaviors in these systems.Up to now,a vast body of literature has been published in dealing with the transport phenomena related to a particle surrounded by a fluid under various physical circumstances.In this paper,principal research results for the transport process of a single spherical particle in pure extensional and simple shear flows presented in the literature,including our recent work,are generally reviewed in order to give a comprehensive knowledge in this area.
The parallel-competing iodide-iodate reaction scheme was used to study the micromixing performance in a multi-phase stirred tank of 0.3 m diameter.The impeller combination consisted of a half elliptical blade disk turbine below two down-pimping wide-blade hydrofoils,identified as HEDT + 2WH_D.Nitrogen and glass beads of100 μm diameter and density 2500 kg-m^(-3) were used as the dispersed phases.The micromixing could be improved by sparging gas because of its additional potential energy.Also,micromixing could be improved by the solid particles with high kinetic energy near the impeller tip.In a gas-solid-liquid system,the gas-liquid film vibration with damping,due to the frequent collisions between the bubbles and particles,led to the decrease of the turbulence level in the liquid and caused eventually the deterioration of the micromixing.A Damping Film Dissipation model is formulated to shed light on the above micromixing performances.At last,the micromixing time t_m according to the incorporation model varied from 1.9 ms to 6.7 ms in our experiments.
