A series of LaxKl xCoO3 nanorod oxides with perovskite structure were synthesized by sol-gel method using polyvinyl al- cohol （PVA） as additive. These perovskite-type complex oxide catalysts were characterized by the techniques of X-ray diffraction （XRD）, infrared （IR）, Brumauer-Emmett-Teller （BET） and scanning electron microscopy （SEM）. And the results showed that nano- rods of La1-xKxCoO3 perovskite-type complex oxides were fabricated by sol-gel method when the mass concentration of PVA was 4% and the calcined temperature kept at 700 ℃ for 4 h. The catalytic results of CO oxidation showed that the LaxK1-xoO3 catalysts had high activity. LaCoO3 nanorods exposed more {110} plane than LaCoO3 nanoparticles, which was beneficial to the catalytic oxi- dation of CO. LaCoO3 nanorods had the best catalytic performance for the oxidation of CO. At 200 ℃, the CO conversion could reach 100%.
A series of meso-microporous Cu-SAPO-34 catalysts were successfully synthesized by a one-pot hydrothermal crystallization method, and these catalysts exhibited excellent NH3-SCR performance at low temperature. Their structure and physic chemical properties were characterized by means of X-ray diffraction patterns （XRD）, Scanning electron microscopy （SEM）, Transmission electron microscopy （TEM）, N2 sorption-desorption, nuclear magnetic resonance （NMR）, Inductively Coupled Plasma-Atomic Emission spectrometer （ICP-AES）, X-ray absorption spectroscopy （XPS）, Temperature-programmed desorption of ammonia （NH3-TPD）, Ultraviolet visible diffuse reflectance spectroscopy （UV-Vis DRS） and Temperature programmed reduction （TPR）. The analysis results indicate that the high activities of Cu-SAPO-34 catalysts could be attributed to the enhancement of redox property, the formation of mesopores and the more acid sites. Furthermore, the kinetic results verify that the formation of mesopores remarkably reduces diffusion resistance and then improves the accessibility of reactants to catalytically active sites. The 1.0-Cu-SAPO-34 catalyst exhibited the high NO conversion （〉90%） among the wide activity temperature window in the range of 150- 425℃.
Jixing LiuFuhong YuJian LiuLifeng CuiZhen ZhaoYuechang WeiQianyao Sun
CeO2–TiO2composite supports with different Ce/Ti molar ratios were prepared by a homogeneous precipitation method, and V2O5–WO3/CeO2–TiO2catalysts for the selective catalytic reduction（SCR） of NOx with NH3 were prepared by an incipient-wetness impregnation method. These catalysts were characterized by means of BET, XRD, UV–Vis,Raman and XPS techniques. The results showed that the catalytic activity of V2O5–WO3/TiO2 was greatly enhanced by Ce doping（molar ratio of Ce/Ti = 1/10） in the TiO2 support.The catalysts that were predominantly anatase TiO2 showed better catalytic performance than the catalysts that were predominantly fluorite CeO2. The Ce additive could enhance the surface adsorbed oxygen and accelerate the SCR reaction. The effects of O2 concentration, ratio of NH3/NO, space velocity and SO2 on the catalytic activity were also investigated. The presence of oxygen played an important role in NO reduction. The optimal ratio of NH3/NO was 1/1 and the catalyst had good resistance to SO2 poisoning.
Kai ChengJian LiuTao ZhangJianmei LiZhen ZhaoYuechang WeiGuiyuan JiangAijun Duan
Highly ordered mesoporous NiMoO4 material was successfully synthesized using mesoporous silica KIT-6 as hard template via vacuum nanocasting method. The structure was characterized by means of XRD, TEM, N2 adsorption-desorption, Raman and FT-IR. The mesoporous NiMoO4 with the coexistence of a-NiMoO4 and fl-NiMoO4 showed well-ordered mesoporous structure, a bimodal pore size distribution and crystalline framework. The catalytic performance of NiMoOa was investigated for oxidative dehydrogenation of propane. It is demonstrated that the mesoporous NiMoO4 catalyst with more surface active oxygen species showed better catalytic performance in oxidative dehydrogena- tion of propane in comparison with bulk NiMoO4.
