A new method for sloshing simulation in a sway tank is present, in which the two phase interface is treated as a physical discontinuity, which can be captured by a well-designed high order scheme. Based on Normalized Variable Diagram （NVD）, a high order discretization scheme with unstructured grids is realized, together with a numerical method for free surface flow with a fixed grid. This method is implemented in an in-house code General Transport Equation Analyzer （ GTEA ） which is an unstructured grids finite volume solver. The present method is first validated by available analytical solutions. A simulation for a 2-D rectangular tank at different excitation frequencies of the sway is carried out. A comparison with experimental data in literature and results obtained by commercial software CFX shows that the sloshing load on the monitor points agrees well with the experimental data, with the same grids, and the present method gives better results on the secondary peak. It is shown that the present method can simulate the free surface overturning and breakup phenomena.
A new method is presented for the water impact simulation, in which the air-water two phase flow is solved using the pressure-based computational fluid dynamics method. Theoretically, the air effects can be taken into account in the water structure interaction. The key point of this method is the air-water interface capture, which is treated as a physical discontinuity and can be captured by a well-designed high order scheme. According to a normalized variable diagram, a high order discrete scheme on unstructured grids is realised, so a numerical method for the free surface flow on a fixed grid can be established. This method is implemented using an in-house code, the General Transport Equation Analyzer, which is an unstructured grid finite volume solver. The method is verified with the wedge water and structure interaction problem.
