The folded double-ridged waveguide structure is presented and its properties used for wide-band traveling-wave tube are investigated. Expressions of dispersion characteristics, normalized phase velocity and interaction impedance of this structure are derived and numerically calculated. The calculated results using our theory agree well with those obtained by using the 3D electromagnetic simulation software HFSS. Influences of the ridge-loaded area and broad-wall dimensions on the high frequency characteristics of the novel slow-wave structure are discussed. It is shown that the folded double-ridged waveguide structure has a much wider relative passband than the folded waveguide slow-wave structure and a relative passband of 67% could be obtained, indicating that this structure can operate in broad-band frequency ranges of beam-wave interaction. The small signal gain property is investigated for ensuring the improvement of bandwidth. Meanwhile, with comparable dispersion characteristics, the transverse section dimension of this novel structure is much smaller than that of conventional one, which indicates an available way to reduce the weight of traveling-wave tube.
A W-band traveling-wave tube (TWT) with double-groove loaded folded waveguide structure (FWSWS) has been designed and numerically modelled. The nonlinear performance of such a TWT is investigated by a particle-in-cell code MAGIC3D. Simulation results indicate this TWT produces a saturated electromagnetic power of 170.2 W at 90 GHz, corresponding to 36.9 dB gain and 69.6 mm interaction distance. A comparison between the novel folded waveguide traveling-wave tube (FWTWT) and the conventional one is also carried out to verify the effect of groove loading on the large-signal performance of TWT. Within the same working conditions, the double groove-loaded FWTWT could obtain higher saturated output power and gain in a shorter interaction length. The maximum of output power and gain of this novel TWT is 58.6% and 10% higher than those of the conventional FWTWT, while the 3-dB bandwidth of TWT is reduced to 4 GHz. With the additional advantage of ease of fabrication based on micro-electro-mechanical systems (MEMS) technologies, the double-groove loaded FWSWS is suitable for a millimeter-wave TWT with high power capacity and gain.
The study on a miniaturized, low-voltage, wide-bandwidth, high-efficiency modified V-shaped microstrip meander-line slow-wave structure is presented. This structure is evolved from the original U-shaped microstrip meander-line slow-wave structure, combining the advantages of a traditional microstrip and a rectangular helix. In this paper, simulations of the electromagnetic characteristics and the beam-wave interaction of this structure are carried out. Our study shows that when the design voltage and the current of a sheet electron beam are set to be 4700 V and 100 mA, respectively, this miniature millimeter-wave power amplifier is capable of delivering 160-W output power with a corresponding gain of 37.3 dB and a maximum interaction efficiency of 34% at 97 GHz.
