Cu-Al/Al nanostructured metallic multilayers with Al layer thickness hAl varying from 5 to 100 nm were prepared, and their mechanical properties and deformation behaviors were studied by nanoindentation testing. The results showed that the hardness increased drastically with decreasing hAl down to about 20 nm, whereafter the hardness reached a plateau that approaches the hardness of the alloyed Cu-Al monolithic thin films. The strain rate sensitivity （SRS, m）, however, decreased monotonically with reducing hAl. The layer thickness-dependent strengthening mechanisms were discussed, and it was revealed that the alloyed Cu-Al nanolayers dominated at hAl≤ 20 nm, while the crystalline Al nanolayers dominated at hAl 〉 20 nm. The plastic deformation was mainly related to the ductile Al nanolayers, which was responsible for the monotonic evolution of SRS with hAl. In addition, the hAFdependent hardness and SRS were quanti- tatively modeled in light of the strengthening mechanisms at different length scales.
Ya-Qiang WangZhao-Qi HouJin-Yu ZhangXiao-Qing LiangGang LiuGuo-Jun ZhangJun Sun
Fatigue properties of the Ti-6.5Al-3.5Mo-1.5Zr-0.3Si alloy sheets containing different numbers of α/β Widmansttten colonies in the thickness direction of the sheets were investigated by tensionetension fatigue testing. It is found that fatigue properties of the Ti alloy either in low- or high-stress amplitude regimes become more sensitive to the sheet thickness of the Ti alloy as the sheet thickness is comparable to the length scale of the Widmansttten colonies. The basic mechanism of such length scale-sensitive fatigue properties in the Ti alloy was elucidated.
Prof.Shan Zhiwei’s group at Xi’an Jiaotong University discovered a novel mechanism for room temperature plastic deformation in magnesium(Nature Communications,2014,5:3297).Magnesium and its alloys have been intensively studied for several decades due to their potential applications in automobile and aerospace industry.Deformation twinning and dislocation slip are known to be
An approach based on film buckling under simple uniaxial tensile testing was utilized in this paper to quan- titatively estimate the interfacial energy of the nanostructured multilayer films （NMFs） adherent to flexible substrates. The interfacial energies of polyimide-supported NMFs are determined to be ~ 5.0 J/m2 for Cu/Cr, ~4.1 J/m2 for Cu/Ta, ~ 2.8 J/m2 for Cu/Mo, ~ 1.1 J/m2 for Cu/Nb, and ~ 1.2 J/m2 for Cu/Zr NMFs. Furthermore, a linear relationship between the adhesion energy and the interfacial shear strength is clearly demonstrated for the Cu-based NMFs, which is highly indicative of the applicability and reliability of the modified models.
Kai WuJin-Yu ZhangGang LiuJiao LiGuo-Jun ZhangJun Sun
