A complex rubber foam under quasi-static compression is simulated using the finite element method （FEM）, The present work sets up the phenomenological constitutive model for the silicon rubber, The computerized tomography （CT） technique is utilized to reconstruct the real complex foam geometries, The quasi-static uniaxial compression on the foam is simulated in ABAQUS. The present work obtains the stress response as the nominal strain nearly reaches 80% and the foam exhibits hyper-elastic behavior, The FEM results achieve good agreements with the data obtained from the multi-scale simulation and the tests as the nominal strain is less than 60%.
A series of plate impact experiments on alumina was conducted using a light gas gun in order to further investigate Hugoniot elastic limit(HEL)and failure properties of alumina under shock compression.The velocity interferometer system for any reflector(VISAR)was used to record the rear-free surface velocity histories of the alumina samples.According to the experimental results,the HELs of tested alumina samples with different thicknesses were measured,and the decay phenomenon of elastic wave in shocked alumina was studied.A phenomenological expression between HEL and thickness of sample was presented,and the causes of the decay phenomenon were discussed.The propagation of failure wave in shocked alumina was probed.The velocity and delayed time of failure wave propagation were obtained.The physical mechanism of the generation and propagation of failure was further discussed.
