Fluoride and arsenic are major anionic elements of concern in drinking water treatment. The effects of contact time, pH, surface loading and ionic strength on adsorption of fluoride and As（V） were investigated using batch methods. Adsorption of fluoride and As（V） onto goethite obeyed a pseudo second-order rate law. Through experimental data and adsorption kinetic analysis, the affinity of As（V） onto goethite was stronger than fluoride. Fluoride and As（V） uptake by goethite all decreased with pH increasing at the same surface loading; however, ionic strength had slight influence on their adsorption. A surface sites-species model was used to quantify the adsorption of fluoride and As（V） onto goethite as function of pH and surface loading. This model can satisfactorily predict their adsorption characteristics with several adsorption constants.
Amino-functionalized Fe3O4@mesoporous SiO/ core-shell composite microspheres NH2-MS in created in multiple synthesis steps have been investigated for Pb（Ⅱ） and Cd（Ⅱ） adsorption. The microspheres were characterized by transmission electron microscope （TEM）, scanning electron microscope （SEM）, N2 adsorption-desorption, zeta potential measurements and vibrating sample magnetometer. Batch adsorption tests indicated that NH2-MS exhibited higher adsorption affinity toward Pb（Ⅱ） and Cd（Ⅱ） than MS did. The Langmuir model could fit the adsorption isotherm very well with maximum adsorption capacity of 128.21 and 51.81 mg/g for Pb（Ⅱ） and Cd（Ⅱ）, respectively, implying that adsorption processes involved monolayer adsorption. Pb（Ⅱ） and Cd（Ⅱ） adsorption could be well described by the pseudo second-order kinetics model, and was found to be strongly dependent on pH and humic acid. The Pb（Ⅱ）- and Cd（Ⅱ）-loaded microspheres were effectively desorbed using 0.01 mol/L HC1 or EDTA solution. NH2-MS have promise for use as adsorbents in the removal of Pb（Ⅱ） and Cd（Ⅱ） in wastewater treatment processes.
Yulin TangSong LiangJuntao WangShuili YuYilong Wang
