In this paper,a novel method is proposed and employed to design a single diffractive optical element（DOE） for implementing spectrum-splitting and beam-concentration（SSBC） functions simultaneously.We develop an optimization algorithm,through which the SSBC DOE can be optimized within an arbitrary thickness range according to the limitations of modern photolithography technology.Theoretical simulation results reveal that the designed SSBC DOE has a high optical focusing efficiency.It is expected that the designed SSBC DOE should have practical applications in high-efficiency solar cell systems.
Two improved algorithms are proposed to extend a diffractive optical element （DOE） to work under the broad spec- trum of sunlight. An optimum design has been found for the DOE, with a weighted average optical efficiency of about 6.8% better than that of the previous design. The optimization of designing high optical efficiency DOEs will pave the way for future designs of high-efficiency, low-cost lateral multijunction solar cells based on such a DOE.
Diffractive optical elements（DOEs） with spectrum separation and beam concentration（SSBC） functions have important applications in solar cell systems. With the SSBC DOEs, the sunlight radiation is divided into several wave bands so as to be effectively absorbed by photovoltaic materials with different band gaps. A new method is proposed for designing high-efficiency SSBC DOEs, which is physically simple, numerically fast, and universally applicable. The SSBC DOEs are designed by the new design method, and their performances are analyzed by the Fresnel diffraction integral method.The new design method takes two advantages over the previous design method. Firstly, the optical focusing efficiency is heightened by up to 10%. Secondly, focal positions of all the designed wavelengths can be designated arbitrarily and independently. It is believed that the designed SSBC DOEs should have practical applications to solar cell systems.
A repeated interdiffusion method is described for phase-stable and high-quality （FA,MA）PbI3 film. The crys- tallization and growth of the perovskite films can be well controlled by adjusting the reactant concentrations. With this method, dense, smooth perovskite films with large crystals have been obtained. Finally, a PCE of 16.5% as well as a steady-state efficiency of 16.3% is achieved in the planar perovskite solar cell.
