A series ofnanosized cobalt oxide catalysts modified with phosphorus have been synthesized by the solgel method and investigated in the oxidative dehydrogenation of propane to propene. With the addition of phosphorus, the crystallite size of the catalyst was largely decreased, while the P species in the catalyst were highly dispersed. Compared to pure cobalt oxide, the P-modified samples showed higher propane conversion and enhanced propene selectivity. Over the PCoO catalyst with a P/Co atomic ratio of 0.05, the maximal propene yields of 15.7% with a propane conversion of 28.3% were obtained at 520 ℃.
Xiao-Zhang LinGuang-Chao LiChuan-Jing HuangWei-Zheng WengHui-Lin Wan
Supported PtCu alloys have been broadly applied in heterogeneous catalysis and electrocatalysis owing to their excellent catalytic performance and high CO tolerance. It is important to analyze the outermost surface composition of the supported alloy nanoparticles to understand the nature of the catalytically active sites. In this paper, homogeneous face-centered cubic PtCu nanoparticles with a narrow particle size distribution were successfully fabricated and dispersed on a high-surface-area Ti〇2 powder support. The samples were oxidized and reduced in situ and then introduced into the ultrahigh vacuum chamber to measure the topmost surface composition by high-sensitivity low-energy ion scattering spectroscopy, and to determine the oxidation states of the elements by X-ray photoelectron spectroscopy. The surface composition and morphology, elemental distribu-tion, and oxidation states of the components were found to be significantly affected by the support and treatment conditions. The PtCu is de-alloyed upon oxidation with CuO wetting on the TiO2 sur-face and re-alloyed upon reduction. Phase diagrams of the surface composition and the bulk com-position were plotted and compared for the supported and unsupported materials.
Pd/C catalysts were prepared by deposited Pd nanoparticles （NPs） on different carbon supports including activated carbon （AC）, graphite oxide （GO）, and reduced graphite oxide （rGO） using sol-immobilization method. Through transmission electron microscopy, powder X-ray di raction, and X-ray photoelectron spectroscopy, the role of the carbon supports for the catalytic performances of Pd/C catalysts was examined in selective hydrogenation of acetylene. The results indicate that Pd/AC exhibited higher activity and selectivity than Pd/GO and Pd/rGO in the gas phase selective hydrogenation of acetylene. Thermal and chemical treatment of AC supports also have some effect on the catalytic performance of Pd/AC catalysts. The differences in the activity and selectivity of various Pd/C catalysts were partly attributed to the metal-support interaction.
