Permanent magnetic materials capable of operating at high temperature up to 500℃ have wide potential applications in fields such as aeronautics, space, and electronic cars. SmCo alloys are candidates for high temperature applications, since they have large magnetocrystalline anisotropy field （6-30 T）, high Curie temperature （720-920℃）, and large energy product （〉200 kJ.m-3） at room temperature. However, the highest service temperature of commercial 2：17 type SmCo magnets is only 300℃, and many efforts have been devoted to develop novel high temperature permanent magnets. This review focuses on the development of three kinds of SmCo based magnets： 2：17 type SmCo magnets, nanocrystalline SmCo magnets, and nanocomposite SmCo magnets. The oxidation protection, including alloying and surface modification, of high temperature permanent magnets is discussed as well.
This paper studies the martensitic transformation in the Cu-doped NiMnGa alloys. The orthorhombic martensite transforms to L21 cubic austenite by Cu substituting for Ni in the Nis0-xCuxMn31Ga19 （x=2 10） alloys, the martensitic transformation temperature decreases significantly with the rate of 40 K per Cu atom addition. The variation of the Fermi sphere radius （kF） is applied to evaluate the change of the martensitic transformation temperature. The increase of kF leads to the increase of the martensitic transformation temperature.
The effects of the addition of Co on the martensitic transformation and Curie transition temperatures of polycrystalline Ni46-xCu4CoxMn33.sGa16.5 （x = 0, 1, 3, 5） alloys are investigated. An abrupt decrease in the martensitic transformation temperature and an obvious increase in the Curie transition temperature of austenite （TA） are observed when Co is doped in the NiCuMnGa alloy. As a result, the composition range for obtaining the magnetostructural transition is extended. Furthermore, the effect of a strong magnetic field on the magnetostructural transition is analyzed. This study offers a possible method to extend the composition range for obtaining magnetostructural transition in Heusler alloys.
Giant magnetostrictive materials are a kind of functional materials developed since 1970s, known as their large magnetostrain and high energy density. In this paper, an introduction of magnetostriction and the history of magnetostrictive materials are described firstly. Then we review the recent developments of both rare earth and non-rare earth magnetostrictive materials. Finally, the tendency of developing new giant magnetostrictive materials is presented.
