On the basis of a molecular mechanics model, an analytical solution of the radial breathing mode （RBM） frequency of single-walled carbon nanotubes （SWCNTs） is obtained. The effects of tube chirality and tube diameter on the RBM frequency are investigated and good agreement between the present results and existing data is found. The present analytical formula indicates that the chirality and size dependent elastic properties are responsible for the effects of the chirality and small size on the RBM frequency of an SWCNT.
A stencil-like volume of fluid （VOF） method is proposed for tracking free interface. A stencil on a grid cell is worked out according to the normal direction of the interface, in which only three interface positions are possible in 2D cases, and the interface can be reconstructed by only requiring the known local volume fraction information. On the other hand, the fluid-occupying-length is defined on each side of the stencil, through which a unified fluid-occupying volume model and a unified algorithm can be obtained to solve the interface advection equation. The method is suitable for the arbitrary geometry of the grid cell, and is extendible to 3D cases. Typical numerical examples show that the current method can give ＂sharp＂ results for tracking free interface.
A nonlinear mathematical model for the analysis of large deformation of frame structures with discontinuity conditions and initial displacements, subject to dynamic loads is formulated with arc-coordinates. The differential quadrature element method （DQEM） is then applied to discretize the nonlinear mathematical model in the spatial domain, An effective method is presented to deal with discontinuity conditions of multivariables in the application of DQEM. A set of DQEM discretization equations are obtained, which are a set of nonlinear differential-algebraic equations with singularity in the time domain. This paper also presents a method to solve nonlinear differential-algebra equations. As application, static and dynamical analyses of large deformation of frames and combined frame structures, subjected to concentrated and distributed forces, are presented. The obtained results are compared with those in the literatures. Numerical results show that the proposed method is general, and effective in dealing with disconti- nuity conditions of multi-variables and solving differential-algebraic equations. It requires only a small number of nodes and has low computation complexity with high precision and a good convergence property.
