Common short bolts of equal length are widely used to support the roofs of roadways in coal mines.However, they are insufficient to keep the roof stable against large deformations, so docking long bolts with high levels of elongation that can adapt to large deformations of the surrounding rock have been adopted. This paper proposes a collaborative support method that uses long and short bolts. In this study,the mechanism of docking long bolts and collaborative support was studied. Numerical simulation, similarity simulation, and field testing were used to analyze the distribution law of the displacement, stress,and plastic failure in the surrounding rock under different support schemes. Compared with the equal-length short bolt support, the collaborative support changed the maximum principal stress of the shallow roof from tensile stress to compressive stress, and the minimum principal stress of the roof significantly increased. The stress concentration degree of the anchorage zone clearly increased. The deformation of the roof and the two sides was greatly reduced, and the subsidence shape of the shallow roof changed from serrated to a smooth curve. The roof integrity was enhanced, and the roof moved down as a whole. Plastic failure significantly decreased, and the plastic zone of the roof was within the anchorage range. The similarity simulation results showed that, under the maximum mining stress,the roof collapsed with the equal-length short bolt support but remained stable with the collaborative support. The collaborative support method was successfully applied in the field and clearly improved the stability of the surrounding rock for a large deformation roadway.
To gain an understanding of gas occurrence, distribution is the fundamental basis for preventing gas disasters. Presently, how tectonic structures control gas occurrence remains problematic. This study proposes the theory and elucidates the mechanism of stepwise tectonic control on gas occurrence according to the characteristics of gas occurrence and the patterns of gas distribution in coal mines in North China. On the one hand, tectonic compression and shearing lead to stress concentration and thus deform the coal and reduce the coal seam permeability, further contributing to gas preservation. On the other hand, tectonic extension and rifting lead to stress release and thus improve the coal seam permeability, further contributing to gas emission. Therefore, the distribution zones of tectonic compression, ubiquitous coal deformation, and gas accumulation have been step-wisely revealed, and the coal-gas outburst proneness zones are finally identified. The proposed theory of step-wise tectonic control on gas occurrence is of practical significance for gas prediction and control.
Deep beam anchorage structures based on spatial distribution analysis of the cable prestressed field have been proposed for roadway roof support, Stability and other factors that influence deep beam structures are studied in this paper using mechanical calculations, numerical analysis and field measurements, A mechanical model of deep beam structure subjected to multiple loading is established, including analysis of roof support in the return airway of S1203 working face in the Yuwu coal mine, China, The expression of maximum shear stress in the deep beam structure is deduced according to the stress superposition criterion, It is found that the primary factors affecting deep beam structure stability are deep beam thickness, cable pre-tension and cable spacing, The variation of maximum shear stress distribution and prestressed field diffusion effects according to various factors are analyzed using Matlah and FLAC3DTM software, and practical support parameters of the S1203 return airway roof are determined, According to the observations of rock pressure, there is no evidence of roof separation, and the maximum values of roof subsidence and convergence of wall rock are 72 and 48 mm, respectively, The results show that the proposed roof support design with a deep beam structure is feasible and achieves effective control of the roadway roof,